1.5THDN
Drift Nest

Magnetic target holder used to establish temporary reference target positions almost anywhere using adhesive.  For 1.5" SMR.
...more

1.5THEDN
Economy Drift Nest

Magnetic target holder used to establish temporary reference target positions almost anywhere using adhesive.  For 1.5" SMR.

...more

1.5THNDN
Negative Drift Nest

Magnetic target holder used to establish a temporary reference location, with a negative viewing angle all the way around.  For 1.5" SMR.

...more

1.5TH
Various shank sizes

Magnetic target holder.  Available with 1.000" and 25mm offsets, various shank sizes.   For 1.5" SMR.


..more

1.5THSB
For slotted bushings

Magnetic target holder, "diamond shank" fits slotted bushings, various shank sizes available.  For 1.5" SMR.
...more

1.5THS
For inside corners

Magnetic target holder, allows reference of the inside corner intersection of two surfaces, different heights available.  For 1.5" SMR.
...more

1.5THE
For outside corners

Magnetic target holder, allows you to reference an outside corner intersection of two surfaces.  For 1.5" SMR.
...more

1.5THLE
For outside corners

Magnetic target holder, allows reference of the outside corner intersection of two surfaces, counter-balanced for hands free operation.  For 1.5" SMR.
...more

1.5THF
Floor mount

Magnetic target holder for permanent floor mount applications, includes lid with o-ring seal.  For 1.5" SMR.

...more

1.5THR
For permanent reference

Magnetic target holder, used to create permanent reference system, with lid.  For 1.5" SMR.

...more

1.5THT
Tripod mount

Tripod mount (or other base) magnetic target holder, to establish temporary or permanent monument, held by customer-supplied stud.  For 1.5" SMR.
...more

1.5INV
Invar mount

Magnetic target holder - fits on our Invar System tubing.  Available with 1.000" and 25mm offsets.  For 1.5" SMR.
...more

1.5THCP
Center punch adapter

Magnetic target holder which doubles as a transfer punch locator, allowing you to mark a point directly under the SMR.  For 1.5" SMR.
...more

1.5THMF
Fits in mini floor mount

Magnetic target holder - fits on our THMF mini floor mount base.  Available with 1.000" and 25mm offsets.  For 1.5" SMR.
...more

THMF
Mini floor mount

Flexible solution for installing permanent reference target mounts in your facility's floors or walls.
...more

0.875TH
Various shank sizes

Magnetic target holder,  available with various offsets and shank sizes.  For 0.875" SMR.
...more

0.875THS
For inside corners

Magnetic target holder, allows reference of the inside corner intersection of two surfaces, different heights available.  For 0.875" SMR.
...more

1.5ADP-.875
SMR Converter

Adapter accepts .875" SMR and fits in any nest intended for 1.5" SMR.
...more

0.5THDN
Drift Nest

Magnetic target holder used to establish temporary reference target positions almost anywhere using adhesive.  For 0.5" SMR.
...more

0.5THDN-T
Drift Nest

Magnetic target holder drift nest with groove for customer-supplied restraint.  Good for FOD-critical areas.  For 0.5" SMR.
...more

0.5TH
Various shank sizes

Magnetic target holder, available with various offsets and shank sizes, for 1/8" to 3/8" and 4mm to 10mm diameter holes.  For 0.5" SMR.
...more

0.5THS

Magnetic target holder, holds the SMR exactly 0.500" above the base surface.  For 0.5" SMR.
...more

0.5THE

Magnetic target holder, for a 0.5" SMR, locating an edge (outside corner) within ±0.0005".
 
...more

0.5THE-M

Similar to the .5THE but with two additional magnets to hold the nest in place during use.  For 0.5" SMR.

...more

1.5ADP-.5
SMR Converter

Adapter accepts 0.5" SMR and fits in any nest intended for 1.5" SMR.
...more

0.5THV
Vector target

Vector target, creates a vector using 0.5" SMR in two locations on the target's centerline.
...more

0.5THMF
Fits in mini floor mount

Magnetic target holder - fits in our THMF mini floor mount base.  For 0.5" SMR.
...more

THMF
Mini Floor Mount

Flexible solution for installing permanent reference target mounts in your facility's floors or walls.
...more

0.5INV

Magnetic adapter to provide a 0.5" SMR nest which fits on any of our Invar System bars.
 
...more

0.5TH-M

Provides all the features of our .5TH Series adapters with the addition of three magnets on the bottom surface of the adapter.
...more