|
SRT-3MO Series
Stick-on "Retro" Targets - Normal Temp Range
|
|
|
Individual targets With No Backing |
 |
|
|
The SRT-3MO Series of retroreflective targets is designed to work
in a "normal" (human tolerable) temperature range.
This series consists simply of target dots cut from 3M® 7610
material stock, having the standard factory adhesive on the back.
These targets may be applied to a variety of materials.
We always
recommend an initial trial on a test surface to determine
ease of removability and characteristic of any residue that
may be left.
This series is available only as a roll of stick-on target
dots that are individually peeled off. They are often used for random
placement on a measuring surface or for measurement of
specific features. They are often used when
no additional contrast is required between the target and
the measurement surface, e.g., on dark colored surfaces.
The SRT-3MO series comes in rolls of 1,000
target dots.
|
Construct your desired part number using the information
found in the guide below and the table at right. The table shows many of
the typical dot sizes. However,
other dot sizes are also available. Contact us if
you don't see what you are looking for.
|
Part number construction:
 |
|
|
Dot Dia. |
A |
Dot Dia. |
A |
| 0.060" |
060 |
2mm |
2MM |
| 0.080" |
080 |
3mm |
3MM |
| 0.090" |
090 |
4mm |
4MM |
| 0.125" |
125 |
5mm |
5MM |
| 0.160" |
160 |
6mm |
6MM |
| 0.200" |
200 |
10mm |
10MM |
| 0.250" |
250 |
12mm |
12MM |
| 0.325" |
325 |
20mm |
20MM |
| 0.375" |
375 |
25mm |
25MM |
| 0.500" |
500 |
|
|
| 0.750" |
750 |
|
|
| 1.000" |
1000 |
|
|
|
|
|
Minimum order quantity: 1 roll, consisting of 1,000
target dots |
Material: 3M® 7610 retroreflective
material Target Height:
Target dot is 0.003" (.08mm) above the adhesive surface. |
- Smooth finished metal, composites, glass, painted metal,
sulfur clay (e.g. automotive models), and other materials.
|
