|
705, 705-1, and 709 Bull's Eye Targets
|
|
|
Bull's Eye targets in two diameters |
 |
|
|
The 705 and 709 bull's eye target patterns are
machine-engraved and black filled on a circular white
plexiglas blank. The pattern has a center dot surrounded by two concentric
circles. They may be backlit for additional visibility
in low-light applications. Backlighting this target
when used as the far target in a line of bore targets gives
a great diffuse backlight for the other targets in the line. The 705 is 2¼" (57.2mm)
diameter and may be used in our
spherical targeting systems. The 709 is 1½" (38.1mm) in
diameter. These targets have holes drilled through on
the target's diameter for mounting and to facilitate
target removal from tight spots. We have other
similar targets on this website.
Note: The 705-1 obviously cannot be backlit.
 |
The 709 (far left) and 705 (near left) differ
only in diameter and mounting hole size. The 705-1 (right) is
aluminum rather than plexiglas, but is identical to the
705 in all other respects.
|
Model |
Diameter |
Material |
| 705 |
2¼" |
57.2mm |
Plexiglas |
| 705-1 |
2¼" |
57.2mm |
Aluminum |
| 709 |
1½" |
38.1mm |
Plexiglas |
|
.jpg) |
|
Target Diameter:
705 and 705-1: A.I.A. standard diameter, 2.2498" - 2.2493"
(57.145mm - 57.132mm)
709: 1.4998" - 1.4993"
(38.095mm - 38.082mm)
Mounting holes:
705 and 705-1: 0.1935" (4.9mm) drilled through
on 1.880" (47.75mm) between centers.
709: 0.1285" (3.3mm) drilled through
on 1.250" (31.75mm) between centers. |
Target pattern: Centered with respect to the diameter
within 0.001" (0.025mm), T.I.R.
Thickness: Nominally 3/8", actual thickness may
vary due to nature of material.
Finish:
705 and 709: None.
705-1: Clear anodize.
Max sustained operating temperature (for
plexiglas targets): 190°F (87°C) |
|
