|
5200 Series T-Slotted Base Plates
|
|
|
Assemble your own alignment telescope base |
 |
|
|
The 5201, 5204, and 5208 T-slotted base plates provide the
basic building blocks for an alignment telescope base. Each of
these base plates have two parallel T-slots which
provide mounting channels for our
5192 adjustable cone assembly. The cone assemblies
permit the optical axis of any alignment telescope to be precisely
adjusted in a variety of ways (shift left-right or up-down, as well
as pitch and yaw). Each baseplate in the 5200 Series has
three counterbored holes which may be used for customer-supplied
mounting. The counterbored bolt hole pattern also fits the
discontinued K+E style collimator test stand, model 7010.
See also related product 5191,
which is a similar T-slotted base plate having a 3½" x 8
threaded hole in the center for mounting directly to a stand
or any accessory having a matching external thread.
The 5200 series base plates differ only in length. Refer
to the table below for the lengths of the three models in this
series:
|
Model |
Overall Length |
| 5201 |
10" |
| 5204 |
14" |
| 5208 |
18" |
|
Width: 8" (20.3cm)
Thickness: 1¼" (32mm)
Mounting holes (3): 9/16" (14.3mm) diameter
through, counterbored 7/8" (22.2mm) diameter, 9/16" (14.3mm)
deep
|
Material: Aluminum
Finish: Black anodized
Approx. Weight:
5201 - 9 lbs (4.1 kg);
5204 - 12.6
lbs (5.7 kg);
5028 - 16.2 lbs (7.3 kg) |
- 5192 V-block cone assembly
- 5182 V-block cone assembly (discontinued)
|
