|
|
|
Put several targets along the same line of sight |
 |
|
|
The 395 see-through target is great for alignment jobs where
it is necessary to focus on various collinear targets that are
positioned down a single line of sight. Wire targets such
as this one prevent any refraction error because glass is not
employed to create the target pattern.
Instead, pairs of flat stainless steel wires* are fixed in a
cross pattern, and mounted in a 2¼" diameter,
heat treated steel ring. Various wire spacings are
available (see table below). This target meets A.I.A. specifications.
|
Model |
Wire* spacing |
| 395-5 |
0.005" |
| 395-10 |
0.010" |
| 395-15 |
0.015" |
| 395-20 |
0.020" |
| 395-25 |
0.025" |
| 395-30 |
0.030" |
| 395-40 |
0.040" |
| 395-50 |
0.050" |
| 395-60 |
0.060" |
| 395-70 |
0.070" |
|
[Note: a rule of thumb suggests that the target spacing, measured in
thousandths of an inch, should be approximately the same as the distance
to the target in feet. Ex., if the shot distance to a target is
40 feet, a target with 0.040" spacing would be most appropriate.]
*The "wires" in our 395 target are all on the same plane.
Each target pattern is fabricated from a sheet of 0.005" stainless steel,
except for the 395-5, which is 0.004" thick. |
|
Target centering: 0.0005" (395-5 and 395-10); 0.001"
on all others.
Target thickness: 1/2" |
Steel ring: 2.2498" to 2.2493" dia. |
- 406-6 or
406-6A Bore Targets
- 521-B Spherical Target Mount
- Many other configurations!
|
