|
|
|
For tripod or other temporary base mounting |
 |
|
|
The 1.5TSM adapter holds a 1.5" diameter SMR
and may be mounted on a customer-supplied base unit using one
of two different stud sizes, depending upon the model ordered.
The bottom side of the 1.5TSM contains an internal
thread for securing this item to a base unit. Both
available models (see table below) have a 5/8"−11 internal
thread which fits surveyor's tripods or other instrument
adapters. However, the model 1.5TSM-1/4-20 is supplied with a
locking threaded insert to allow the unit to be used with
camera tripods or other mounts having a 1/4"−20 thread. A
1/4" hole on
the side is provided to assist in removal of the adapter if
needed. The SMR seats on a 3-point conical land and is held
in place by a nickel-plated Neodymium magnet.
 |
|
Model |
Mounting hole size |
| 1.5TSM-1/4-20 |
1/4"-20 |
| 1.5TSM-5/8-11 |
5/8"-11 |
|
|
|
Adapter size:
1.6" diameter x 1.5" high (40.64mm dia. x 38.1mm high) |
Effective Height (height from base to center of SMR): Approx. 2.07" (52.6mm) above base of the adapter
Material: Stainless steel
|
|
