|
0.5THV Series Vector Target Adapter
|
|
|
Use two target points to define a line |
 |
|
|
The 0.5THV Series creates a vector by using two target locations,
precisely on the centerline of the adapter. Using most any software,
it is easy to locate the point on the centerline of the shank which lies
on the surface of the object being measured. This adapter may be used to
create vector lines to evaluate "remote" target points
(e.g., a critical point downrange on a hinge line).
It is also handy when you suspect that the target hole
may not be drilled square to the surface.
.jpg)
Choose any "A" value from the table below, to create the item
number for the product that you want, for example, 0.5THV-.375.
Part number construction:
 |
|
Common sizes* |
Shank dia. |
A |
Shank dia. |
A |
| 1/8" |
.125 |
4 mm |
4MM |
| 3/16" |
.1875 |
5 mm |
5MM |
| 1/4" |
.25 |
6 mm |
6MM |
| 5/16" |
.3125 |
7 mm |
7MM |
| 3/8" |
.375 |
8 mm |
8MM |
| 1/2" |
.5 |
9 mm |
9MM |
| 3/4" |
.75 |
10 mm |
10MM |
|
*Contact us with your specifications |
|
Adapter dia (main body): 1" (25.4mm)
Offset tolerance: ±0.0005" (±0.013mm)
Shank diameter tolerance: −0.0001" to
−0.0005" (−0.003mm to −0.013mm)
Material: Stainless steel
Hardness: HRC 42-45 |
|
|
