|
1.5THR-TL
Reference Target Mounts
|
|
|
For permanently mounted reference systems |
PDF  |
|
|
Are you building or adding to a
permanently mounted reference system? The 1.5THR-TL
is made exactly for that purpose - establishing permanent
target points on jigs, fixtures, tools, and machinery.
Use 1/4" bolts through the two counterbored holes in the base
to provide secure mounting. Then, two other 15/64th
holes act as drill guides for placement of owels.
Once the 1.5THR-TL is bolted down, use a 15/64ths drill
through these guide holes into the substrate, ream to 1/4",
and insert dowels for a permanent fix on the target's
position.
A lid is included to keep out dust and dirt when not in use, held in place by
two up-facing magnets on the top face of the nest. The lid overhangs the base slightly to aid
in removal. A non-tethered version (one without the beaded chain) of the same product
is available by specifying model number
1.5THR.
|
|
Mounting holes: 0.266" (6.76mm) diameter, counterbored
to 0.438" (11.13mm) dia., 0.250" (6.35mm) deep, on 1.750" (44.45mm) centers
Doweling holes: 0.235" (5.97mm) dia. through, on
1.750" (44.45mm) centers |
Lid diameter: 2.250" (57.2mm)
Base and Lid Material: Stainless steel
Hardness: HRC 42-45 |
|
