|
0.5THSC Self-Centering SMR Adapters
|
 |
|
|
Conical plunger centers itself on multiple diameters |
PDF |
|
|
The 0.5THSC magnetic adapter is used to gather quick
data points over a range of hole sizes using a single
adapter. The secret is a
spring-loaded, cone-shaped, locating plunger (illustration
below). This
adapter will locate on hole sizes 0.100" to 0.420" (2.5mm to
10.5mm). Keep in mind that we can also make these
adapters to fit other hole diameters on request. Three
strong magnets on the bottom keep the adapter squarely on
any ferrous surface, and counteract the spring-loaded force
of the plunger. The adapter is reliable and
repeatable. A grooved profile around the outer perimeter assists
in removal after measuring is finished. The adapter
holds the centerpoint of a 0.5" diameter SMR 1.000" (or
25mm
for the metric version) above the surface of the part and on
centerline of the hole to a tolerance of �0.0005"
(�0.013mm). The SMR seats on a conical land
and is held in place by a magnet.
|
|
 |
| |
Model No. |
Offset "A" |
| English |
0.5THSC-1 |
1.000" |
|
Metric |
0.5THSC-25MM |
25mm |
 |
|
Adapter dia: 1.250" (31.8mm)
Material: Stainless steel
Fits hole sizes: 0.100" - 0.420" (2.5mm -
10.5mm)
|
Offset tolerance: ±0.0005" (±0.013mm)
Target centering tolerance: ±0.0005" (±0.013mm) Hardness: HRC 42-45 |
|
|
|
